#13 - Aug. 4, 2007
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
#13 - Aug. 4, 2007
I've kinda lapsed in stumping you guys with Truck Trivia, so I'm going to try to get this going again...at least once a week.
For this one, I can't give any clues without giving it away. Just identify these screws....where they're used (and give the specific application). Good luck!
For this one, I can't give any clues without giving it away. Just identify these screws....where they're used (and give the specific application). Good luck!
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- rjewkes
- 100% FORDified!
- Posts: 3711
- Joined: Sun Apr 17, 2005 1:09 am
- Location: Missouri, Webb City
- Contact:
carburator screws. used on the power valve cover. I've also seen them on the choke thermostat.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: #13 - Aug. 4, 2007
These are way too big for that.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- kaptnkaos
- 100% FORDified!
- Posts: 2029
- Joined: Thu Feb 16, 2006 1:27 am
- Location: Washington, Elma
re: #13 - Aug. 4, 2007
They look like the same size and length as the ones that mounted the oil cooler to the rad support on the '71 CS I dismantled.
If so, they were a bugger to get out.
KaptnKAOS
If so, they were a bugger to get out.
KaptnKAOS
Washington...The land where rust is like the family pet...Ya learn to live with it and clean up after its mess... KaptnKAOS
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
- Wes
- Blue Oval Fan
- Posts: 732
- Joined: Fri Oct 21, 2005 6:04 pm
- Location: California, Southern& Lake Havasu Az
oil pump cover plate on your 460
Wes
http://www.fordification.com/galleries/ ... ?cat=10402
67 F250 High boy
69 Bronco
If you can't see fit to stand behind Our Troops...Please stand in front of them
http://www.fordification.com/galleries/ ... ?cat=10402
67 F250 High boy
69 Bronco
If you can't see fit to stand behind Our Troops...Please stand in front of them
- ToughOldFord
- 100% FORDified!
- Posts: 1911
- Joined: Mon Jul 25, 2005 10:47 pm
- Location: Communist California, USA
re: #13 - Aug. 4, 2007
Cam plate screws?
- kaptnkaos
- 100% FORDified!
- Posts: 2029
- Joined: Thu Feb 16, 2006 1:27 am
- Location: Washington, Elma
re: #13 - Aug. 4, 2007
Dietz (?) Front fender marker light screws
KaptnKAOS
KaptnKAOS
Washington...The land where rust is like the family pet...Ya learn to live with it and clean up after its mess... KaptnKAOS
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
- rjewkes
- 100% FORDified!
- Posts: 3711
- Joined: Sun Apr 17, 2005 1:09 am
- Location: Missouri, Webb City
- Contact:
hmm i thought it was just a close up shot.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
- ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City
re: #13 - Aug. 4, 2007
jeez, i know i have seen those before, but i can't remember where. i know that they are countersunk, and i was thinking there were three of them.
wanting to buy a mercury tailgate!
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
- rjewkes
- 100% FORDified!
- Posts: 3711
- Joined: Sun Apr 17, 2005 1:09 am
- Location: Missouri, Webb City
- Contact:
vent window screws hold the vent window frame to the front of the door.and there are three and they are a bugger to get out. there is a forth screw in the door pannel but it is a trim screw.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
Re: re: #13 - Aug. 4, 2007
YES! These are the camshaft plate retaining screws on an FE.ToughOldFord wrote:Cam plate screws?
All good guesses though!
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- ToughOldFord
- 100% FORDified!
- Posts: 1911
- Joined: Mon Jul 25, 2005 10:47 pm
- Location: Communist California, USA
re: #13 - Aug. 4, 2007
I got one!
What made me guess that way was mainly the look of the oily buildup on them. That told me they were probably internal and there aren't very many screws on the inside of an engine. So I was thinking the cam plate or maybe oil pump related, but IIRC the oil pumps are assembled with bolts too. And the cam plate uses those screws because bolts interfere with the sprocket. (I learned that last part. )
What made me guess that way was mainly the look of the oily buildup on them. That told me they were probably internal and there aren't very many screws on the inside of an engine. So I was thinking the cam plate or maybe oil pump related, but IIRC the oil pumps are assembled with bolts too. And the cam plate uses those screws because bolts interfere with the sprocket. (I learned that last part. )
- kaptnkaos
- 100% FORDified!
- Posts: 2029
- Joined: Thu Feb 16, 2006 1:27 am
- Location: Washington, Elma
re: #13 - Aug. 4, 2007
maybe a dumb question now that I know what they are...
Where are they located?
I don't recall ever seeing that piece on my truck...
Are they behind the cam gear, behind the timing cover?
If that's the case... I ain't never seen them screws b-4
KaptnKAOS
Where are they located?
I don't recall ever seeing that piece on my truck...
Are they behind the cam gear, behind the timing cover?
If that's the case... I ain't never seen them screws b-4
KaptnKAOS
Washington...The land where rust is like the family pet...Ya learn to live with it and clean up after its mess... KaptnKAOS
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
- ToughOldFord
- 100% FORDified!
- Posts: 1911
- Joined: Mon Jul 25, 2005 10:47 pm
- Location: Communist California, USA
Re: re: #13 - Aug. 4, 2007
Yep, that's where they are!kaptnkaos wrote:maybe a dumb question now that I know what they are...
Where are they located?
I don't recall ever seeing that piece on my truck...
Are they behind the cam gear, behind the timing cover?
If that's the case... I ain't never seen them screws b-4
KaptnKAOS
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: #13 - Aug. 4, 2007
Since a picture's worth a thousand words:
This is the view after removing the timing cover, and then the timing gears/chain.
This is the view after removing the timing cover, and then the timing gears/chain.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!