has anyone ever fixed low oil pressure
Moderators: Ranchero50, DuckRyder
-
- Preferred User
- Posts: 369
- Joined: Wed Feb 04, 2009 8:01 pm
has anyone ever fixed low oil pressure
i changed the oil filter with no good results.
- ximy
- Preferred User
- Posts: 372
- Joined: Fri Oct 23, 2009 4:18 pm
- Location: socal
Re: has anyone ever fixed low oil pressure
How low is it.. Do you have a gauge??? Is it only low at idle??? Did you use 20-50 oil?
1967 f250 428
- 1982 flareside
- Blue Oval Fan
- Posts: 639
- Joined: Tue Nov 03, 2009 9:15 pm
- Location: Leitchfield Ky
Re: has anyone ever fixed low oil pressure
you may need cam bearings and main bearing. If it is idling with low oil pressure.
Jeremy
1971 Ford F250 camper special 360 T18(old model) 4 speed 4.11 gears 2wd with 1969 doghouse soon to be daily driver FRANKENFORD
1982 Ford F150 flareside 300 T18(new model) 4 speed 4.11 gears 4wd Daily driver
Some people say my truck is ugly and all i say is "Beauty is in the eyes of the beholder.
1971 Ford F250 camper special 360 T18(old model) 4 speed 4.11 gears 2wd with 1969 doghouse soon to be daily driver FRANKENFORD
1982 Ford F150 flareside 300 T18(new model) 4 speed 4.11 gears 4wd Daily driver
Some people say my truck is ugly and all i say is "Beauty is in the eyes of the beholder.
-
- Preferred User
- Posts: 369
- Joined: Wed Feb 04, 2009 8:01 pm
Re: has anyone ever fixed low oil pressure
being the engine was sludged , im thinking the screen on the oil pump is clogged, possible??
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: has anyone ever fixed low oil pressure
dump some marvel mystry oil in it the next oil change. that will help clean up the inside of the engine. trans fluid also works.
- DuckRyder
- Moderator
- Posts: 4941
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: has anyone ever fixed low oil pressure
ximy wrote:How low is it.. Do you have a gauge??? Is it only low at idle??? Did you use 20-50 oil?

Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- BobbyFord
- 100% FORDified!
- Posts: 5383
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: has anyone ever fixed low oil pressure
What engine?
-
- Blue Oval Fan
- Posts: 728
- Joined: Sun Feb 19, 2006 11:02 pm
- Location: North Carolina, Cameron
Re: has anyone ever fixed low oil pressure
Whenever troubleshooting a problem K.I.S.S.... That stands for Keep It Simple Stupid. As was suggested you might want to use an engine flush with your next oil change. Check your pickup tube/screen by dropping the oil pan. Maybe replace the oil pump. Does the oil pressure rise when you rev the engine? How are you determining it is low? Idiot light? Factory electric needle gauge? Aftermarket mechanical gauge?
Patrick
Patrick
Chevrolet
Can Hear Every Valve Rattle on Long Extended Trips
1969 F100 4X4 Highboy 390 3sp
1969 F100 SWB 2wd Auto 351w
1972 F100 Ranger XLT 302 Auto
http://mrsnicks.blogspot.com
http://www.fordification.com/galleries/ ... ?cat=10336
Can Hear Every Valve Rattle on Long Extended Trips
1969 F100 4X4 Highboy 390 3sp
1969 F100 SWB 2wd Auto 351w
1972 F100 Ranger XLT 302 Auto
http://mrsnicks.blogspot.com
http://www.fordification.com/galleries/ ... ?cat=10336
- ToughOldFord
- 100% FORDified!
- Posts: 1913
- Joined: Mon Jul 25, 2005 10:47 pm
- Location: Communist California, USA
Re: has anyone ever fixed low oil pressure
Don't use orange oil filters.
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: has anyone ever fixed low oil pressure
Ditto that...
HV oil pump works wonders, clean the screen while you are in there.
HV oil pump works wonders, clean the screen while you are in there.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.