If there's anything Bumpside owners like as much as their trucks, it's a good deal! Check these out.
I had to part with my 1967 F100 and I have tons of goodies that never made it to the truck. Check out my post in the board for Craigslist ads for pictures. Contact me with questions or for additional photos.
Original 1967 Steel Inner Door Panels (no rust) ($40)
Ford 300 straight 6 box-o-parts... $30 buys:
NEW Electronic Distributor & Cap ($60 value by itself!)
NEW 6 Oil Pump & Filter ($50 value by itself!)
NEW 6 Temp Sensor & Thermostat ($25 value)
NEW Holley 4160 Carb Rebuild Kit Part #37-720 ($30 value)
1967 Inner Door Panels - $40
Moderator: FORDification
-
robwymer
- New Member
- Posts: 105
- Joined: Thu Sep 20, 2007 11:01 pm
- Location: Northern Virginia
- Contact:
1967 Inner Door Panels - $40
Last edited by robwymer on Thu May 30, 2019 9:33 pm, edited 13 times in total.
67 F-100 Flareside, 300, Offenhauser 360, Holley 390, Duraspark and MSD ignition, NP-435 4-speed, 3.55 Dana 60, and it will absolutely roast 30" rear tires taking off in 2nd (the one time I tried scared the Bejeezus out of me)
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
-
robwymer
- New Member
- Posts: 105
- Joined: Thu Sep 20, 2007 11:01 pm
- Location: Northern Virginia
- Contact:
Re: PRICE CUT! Tilt/Cruise Column & Wheel, (2) F600 Gauge Clusters, Comp Cams Camshaft & Lifters, 1967 Shop Manuals....
Prices cut! MSD ignition sold.
67 F-100 Flareside, 300, Offenhauser 360, Holley 390, Duraspark and MSD ignition, NP-435 4-speed, 3.55 Dana 60, and it will absolutely roast 30" rear tires taking off in 2nd (the one time I tried scared the Bejeezus out of me)
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
-
robwymer
- New Member
- Posts: 105
- Joined: Thu Sep 20, 2007 11:01 pm
- Location: Northern Virginia
- Contact:
Re: PRICE CUT! F600 Gauge Cluster, Door Panels, misc parts, etc.
Still got a few parts left. I don't usually like to post on Craigslist...but I'm glad I did!
67 F-100 Flareside, 300, Offenhauser 360, Holley 390, Duraspark and MSD ignition, NP-435 4-speed, 3.55 Dana 60, and it will absolutely roast 30" rear tires taking off in 2nd (the one time I tried scared the Bejeezus out of me)
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
-
robwymer
- New Member
- Posts: 105
- Joined: Thu Sep 20, 2007 11:01 pm
- Location: Northern Virginia
- Contact:
Re: 1967 Inner Door Panels - $50
Just the door panels are left. Everything else has been sold or thrown away in preparation for my move.
67 F-100 Flareside, 300, Offenhauser 360, Holley 390, Duraspark and MSD ignition, NP-435 4-speed, 3.55 Dana 60, and it will absolutely roast 30" rear tires taking off in 2nd (the one time I tried scared the Bejeezus out of me)
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
-
robwymer
- New Member
- Posts: 105
- Joined: Thu Sep 20, 2007 11:01 pm
- Location: Northern Virginia
- Contact:
Re: 1967 Inner Door Panels - $40
Last ditch effort to sell the door panels before my move.
67 F-100 Flareside, 300, Offenhauser 360, Holley 390, Duraspark and MSD ignition, NP-435 4-speed, 3.55 Dana 60, and it will absolutely roast 30" rear tires taking off in 2nd (the one time I tried scared the Bejeezus out of me)
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
-
67 short box
- New Member
- Posts: 188
- Joined: Fri Feb 02, 2018 7:36 pm
- Location: comanche, texas
Re: 1967 Inner Door Panels - $40
u still got them there door panels?
'
'
-
robwymer
- New Member
- Posts: 105
- Joined: Thu Sep 20, 2007 11:01 pm
- Location: Northern Virginia
- Contact:
Re: 1967 Inner Door Panels - $40
Yes, I do.
67 F-100 Flareside, 300, Offenhauser 360, Holley 390, Duraspark and MSD ignition, NP-435 4-speed, 3.55 Dana 60, and it will absolutely roast 30" rear tires taking off in 2nd (the one time I tried scared the Bejeezus out of me)
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
-
67 short box
- New Member
- Posts: 188
- Joined: Fri Feb 02, 2018 7:36 pm
- Location: comanche, texas
Re: 1967 Inner Door Panels - $40
im in texas not sure if you want to mail them.
if so my zip is 76442
just let me know and thanks
if so my zip is 76442
just let me know and thanks
-
robwymer
- New Member
- Posts: 105
- Joined: Thu Sep 20, 2007 11:01 pm
- Location: Northern Virginia
- Contact:
Re: 1967 Inner Door Panels - $40
[quote="67 short box"]im in texas not sure if you want to mail them.
if so my zip is 76442
just let me know and thanks[/quote]
PM sent.
if so my zip is 76442
just let me know and thanks[/quote]
PM sent.
67 F-100 Flareside, 300, Offenhauser 360, Holley 390, Duraspark and MSD ignition, NP-435 4-speed, 3.55 Dana 60, and it will absolutely roast 30" rear tires taking off in 2nd (the one time I tried scared the Bejeezus out of me)
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."
Next engine mod: RV cam (252*)
"They just don't make 'em like they used to."