1967-72 f100 parting out

Txvet · Post by **Txvet** » Wed Mar 28, 2018 5:01 am

I was wondering if you had some west coast mirrors? The 3 point mounting

QSA United · Post by **QSA United** » Fri Apr 06, 2018 3:38 am

59yblockf100 wrote:i have a few 67-72 f100s and older trucks i am parting out,i have alot of parts,if you need something let me no,i will be adding parts as i get them off,thanks

Still have the trucks?

59yblockf100 · Post by **59yblockf100** » Fri Apr 06, 2018 2:15 pm

yes i have some parts left,

sideoilerfe · Post by **sideoilerfe** » Tue Apr 10, 2018 6:36 pm

Looking for a 64-70 3 spoke Steering Wheel. Do you have one?

59yblockf100 · Post by **59yblockf100** » Wed Apr 11, 2018 11:03 am

will have to check and see what i have,this weekend,thanks

70reef · Post by **70reef** » Sat Jun 16, 2018 7:47 am

I need the door striker pin that screws into door jam thanks, bob

nicadocius22 · Post by **nicadocius22** » Sat Jun 16, 2018 11:36 pm

Hey. Looking for headlight bezels for 67-69. Don't need to be cherry, they will be painted. Possibly a lower valance too. And maybe 2 f250 dog dish hub caps. Thanks man, Nick

59yblockf100 · Post by **59yblockf100** » Tue Jul 03, 2018 2:50 pm

no headlight bezels,do have 68 lower valance,headliner trim,dip rao; trim,headliner trim,custon cab emblems ect all in fair condition

mrmtbaldy · Post by **mrmtbaldy** » Sat Jul 07, 2018 3:06 pm

I'm looking for the rubber end of a factory ac or heater duct hose where it mates with the vent holes in the dash. Most times the rubber pieces are glued or stapled to the end of the duct hose, so I would take a full hose or just the rubber piece. Let me know if you have any of these lying around. Thanks!

Dan

bkoonce88 · Post by **bkoonce88** » Mon Jul 23, 2018 2:32 pm

I am looking for a good hood for a 1970 f110 Custom. Do you have?? I am in SE Texas.

59yblockf100 · Post by **59yblockf100** » Sat Jul 28, 2018 12:56 am

yes i do,but its in ca,

urchinhead · Post by **urchinhead** » Sun Aug 05, 2018 1:41 pm

I am looking for the bracket that bolts to the power steering box, and holds the brake lines in place. It has two bolts that attach to the steering box.

I am also looking for a nice 360/390 “Power by Ford,” valve cover that is not dented up.

Please let me know.

Ron_Hall · Post by **Ron_Hall** » Sun Aug 05, 2018 4:18 pm

urchinhead wrote:I am looking for the bracket that bolts to the power steering box, and holds the brake lines in place. It has two bolts that attach to the steering box.

I am also looking for a nice 360/390 “Power by Ford,” valve cover that is not dented up.

Please let me know.

If he doesn't have the bracket, I do.

Ron

59yblockf100 · Post by **59yblockf100** » Sun Aug 05, 2018 5:05 pm

urchinhead i do have the valve covers,need cleaning and paint,can send you pictures if you pm me your email address,i dont have the bracket,ron hall sent you a pm on the drip rail trim,didnt hear back from you,

59yblockf100 · Post by **59yblockf100** » Sun Aug 05, 2018 5:06 pm

urchinhead i do have the valve covers,need cleaning and paint,can send you pictures if you pm me your email address,i dont have the bracket,ron hall sent you a pm on the drip rail trim,didnt hear back from you,

The FORDification.com Forums

1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out