67 Radio ????

gjack3xxx · Post by **gjack3xxx** » Fri Jun 01, 2018 9:39 am

HI got a 67 model verified by VIN, and the radio does not work. Of course there are tons of radios aftermarket for 68 and up. I will look for original at some point just to have, but right now I would like an aftermarket radio so I can cruise around here some tunes

What have you other 67 owners done for radios ?? I do not want to cut the dash thanks

Busboy · Post by **Busboy** » Fri Jun 01, 2018 7:00 pm

Yeah, please don't cut the dash. I eventually find original 67 radios and use them but I like to keep things original.

Ohiotinkerer · Post by **Ohiotinkerer** » Sat Jun 02, 2018 11:24 am

Might not look the greatest but for a temporary solution you could mount something under the dash - they used to make plastic boxes that a modern radio would fit in..........it was easier for me to put a modern radio in mine since its a 68 - I cut and modified an extra bezel i had and just bent the tabs in........

67 short box · Post by **67 short box** » Sat Jun 02, 2018 6:13 pm

I thinking about sending mine off to a place in tennesse that does conversions on these. they put new guts in them for am-fm and other updates. neat deal but cost over $300.00 just for the basic conversion.

gjack3xxx · Post by **gjack3xxx** » Sun Jun 03, 2018 10:55 am

thanks all, I saw a a couple places online that will rebuild my radio and upgrade it, guess I will go that route. Also saw that I could take measurements and get a custom one built all options are not cheap but thats how it goes thanks

67 short box · Post by **67 short box** » Sun Jun 03, 2018 9:39 pm

tell us what your doing if possible
I need options as well....

DisneysPatB · Post by **DisneysPatB** » Mon Jun 04, 2018 9:51 am

This is what I went with. https://www.retromanufacturing.com/prod ... libu-radio

67 short box · Post by **67 short box** » Thu Jun 07, 2018 9:21 pm

whats the best way to get it out? I'm thinking remove the glove box liner and send it out that way, hate to remove the three heater cables. or maybe remove the ash tray? the defrost hoses wont be a problem.

Bullitt74 · Post by **Bullitt74** » Tue Jun 12, 2018 9:33 am

gjack3xxx wrote:thanks all, I saw a a couple places online that will rebuild my radio and upgrade it, guess I will go that route. Also saw that I could take measurements and get a custom one built all options are not cheap but thats how it goes thanks

I think this is a great option. Not much will change for technology (other than iPhone cables

), but the look of an original radio is timeless.

1968f250429 · Post by **1968f250429** » Wed Apr 10, 2019 9:55 pm

I just sent my 68 am to r&b vintage auto radio in Tennessee. The full conversion is around 735.00.
It will have bluetooth, hands free calling, voice control and auxiliary in and USB port and hd radio as well. Check out his YouTube videos on the radios he's done.
Link to my radio he did: https://youtu.be/ffodBA6YpSo

1968f250429 · Post by **1968f250429** » Sun Jun 21, 2020 12:59 am

I no longer have the 67 radios. Were sold a couple years ago.

The FORDification.com Forums

67 Radio ????

67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????

Re: 67 Radio ????