EDITED: 1972 Ford Truck Grille

hdman90 · Post by **hdman90** » Fri Sep 22, 2017 9:27 am

1972 grille (will fit '67-'72), not perfect, but in good shape. Only one dent, which will be covered by the right headlight bezels. I do have both inserts, which are complete and uncracked. Will come with turn signals and sockets. Will come with upper&lower stone guard/valance panel. Radiator support not included.
Can send more pictures upon request, will include one headlight bezel.

Buyer must pay shipping from 16510 or schedule pickup.

Open to ALL offers/bump parts trades.

IMG_2276.JPG

IMG_2277.JPG

IMG_2279.JPG

hdman90 · Post by **hdman90** » Sat Oct 28, 2017 7:35 am

Edited, tired of this sitting in my small shed and taking up space. Would like to see it go to a good home.

Post by **Ranchero50** » Sat Oct 28, 2017 3:43 pm

Hang it on a wall or ceiling. I've even been known to screw them to the fence behind the shop but the morning glories made a mess of that idea.

That's what I do with the 'spares'.

hdman90 · Post by **hdman90** » Mon Oct 30, 2017 7:27 am

Ranchero,
I have 3 '67 grilles, 1 '68 grille, and 2 '69 grilles. None of those are for sale... I don't know what it is, but I am not crazy about the '71-'72 grilles... but I guess if I have to hang onto it, it would make good wall art in the garage... when I have one... LOL

Zorm · Post by **Zorm** » Mon Oct 30, 2017 7:48 am

well, I don't need the grill inserts, already have the 71 and 72 ones. Don't need the stone guard or turn signal stuff. Humm its just the shipping from there to Fla. I do have two of these grill shells but both have damage that sticks out like a sore thumb.....and I do have on of them hanging in the rafters of my car port as "wall art" haha

cstoyer · Post by **cstoyer** » Mon Oct 30, 2017 8:28 am

hdman90 wrote:Ranchero,
I have 3 '67 grilles, 1 '68 grille, and 2 '69 grilles. None of those are for sale... I don't know what it is, but I am not crazy about the '71-'72 grilles... but I guess if I have to hang onto it, it would make good wall art in the garage... when I have one... LOL

Well if you ever think about parting with the 68 Grille give me a shout.

I too have wall art in the form of a 71-72 Large Aluminum Tailgate Filler Panel and 69 Steel Grille that was chromed at sometime in its life.

hdman90 · Post by **hdman90** » Mon Oct 30, 2017 9:20 am

cstoyer wrote:
hdman90 wrote:Ranchero,
I have 3 '67 grilles, 1 '68 grille, and 2 '69 grilles. None of those are for sale... I don't know what it is, but I am not crazy about the '71-'72 grilles... but I guess if I have to hang onto it, it would make good wall art in the garage... when I have one... LOL
Well if you ever think about parting with the 68 Grille give me a shout.

I too have wall art in the form of a 71-72 Large Aluminum Tailgate Filler Panel and 69 Steel Grille that was chromed at sometime in its life.

Cstoyer, where in NW PA are you located?? Never seen your truck before!

hdman90 · Post by **hdman90** » Mon Oct 30, 2017 9:49 am

Zorm wrote:well, I don't need the grill inserts, already have the 71 and 72 ones. Don't need the stone guard or turn signal stuff. Humm its just the shipping from there to Fla. I do have two of these grill shells but both have damage that sticks out like a sore thumb.....and I do have on of them hanging in the rafters of my car port as "wall art" haha

Zorm, if you want to look into it more, you can. Approx box dimensions would be 79" x 16" x 8", and approx weight would be around 18 lbs.
I'm okay with holding onto everything else, as it takes up much less space.

hdman90 · Post by **hdman90** » Mon Dec 04, 2017 11:10 am

Bump.

Going on Ebay soon if not sold.

ian1967 · Post by **ian1967** » Fri Dec 15, 2017 8:29 pm

what was your best offer ? I'm interested

ian1967 · Post by **ian1967** » Fri Dec 15, 2017 8:35 pm

didn't realize it was BJ

is this grill better condition than the 67?

hdman90 · Post by **hdman90** » Sat Dec 16, 2017 10:23 pm

Umm... I would say they’re both in about the same condition... this one wouldn’t have any visible dents after the headlight bezels are installed. But the surface finish quality is better on the ‘67. This one has surface stains from sitting outside (I’m assuming).
The stains would come out of the grille if the anodization were stripped, but I don’t have the time or the means to do it at the moment.

vossy · Post by **vossy** » Thu Feb 01, 2018 1:04 pm

Still have these grilles? Intersted in either one. PM me, and we can discuss details. Shipping from you to me is about 130 dollars, according to UPS's calculator.

hdman90 · Post by **hdman90** » Thu Feb 01, 2018 1:52 pm

vossy wrote:Still have these grilles? Intersted in either one. PM me, and we can discuss details. Shipping from you to me is about 130 dollars, according to UPS's calculator.

Vossy,
Currently, both of these grilles are sold and gone. However, I will soon have another 71-72 grille for sale in the upcoming months.
Stay in touch.

vossy · Post by **vossy** » Thu Feb 01, 2018 2:01 pm

Thanks!

The FORDification.com Forums

EDITED: 1972 Ford Truck Grille

EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille

Re: EDITED: 1972 Ford Truck Grille