Dana Spicer 44 front wheel drive hub lockout o-rings

[aelmo]

I would like to share some information that may be helpful, or save time to others looking for
replacement o-rings for the Dana Spicer 44 front wheel drive hub lockout
referred to as spicer models 30 and 44 internal type front axle HUB LOK.
The smaller o-ring for the actuator knob is 2 Inch I.D. x 2-3/16 Inch O.D. x 3/32 Inch cs national o-ring part# NAT136
The larger o-ring for the retainer knob hub ring is 3-1/8 Inch I.D. x 3-3/8 Inch O.D. x 1/8 Inch cs national o-ring part# NAT235
These parts work for my 1968 Ford f100 4x4 with dana 44-7 front axle.

lockinghubsF100(3Kaxle).jpg

[Manny]

Thanks for the good info. That's a tough one to find. We appreciate the time you put into it to research it.