I finally have all the necessary parts to install a windshield washer setup on my 68. I have a few questions though.
Just a little history so the picture is a little clearer.
Installed a delay wiper setup from a 78 Bronco.
Installed a resevoir from a 71 F? with the pump in the res. Caveat was made that the pump may or may not work.
New ( used ) complete wiring harness installed.
Needed a new pigtail for the 71 resevoir ( not the same plug as the 68 )
Received the new plug today ( thanks Heavenlyfire ). The wires on the harness for the washer pump 68 were Black and Green with black stripe. The 71 plug has Black and Yellow wires.
I connected the black wires together and the yellow to the green with black stripe. Anybody know if this is okay?
The reason I'm asking is that I have tried every possible position on the wiper switch to get the pump to work but nothing. I've pushed in, pulled out, turned all the way both ways and nil
![Sad :(](./images/smilies/icon_sad.gif)
This could be all due to a bad pump as stated when I bought it but thought I'd ask a few questions before dumping more money into something I might not need.
Any help would be appreciated and sorry for the long post. Is it as clear as mud now?
![Wink :wink:](./images/smilies/icon_wink.gif)
Thanks,
Lee