Octane ratings
Moderators: Ranchero50, DuckRyder
-
OldRedFord
- Blue Oval Guru
- Posts: 1314
- Joined: Tue Jan 29, 2008 11:37 pm
- Location: Hull GA
- Contact:
Octane ratings
Trying to figure out if 9.5-1 compression is 87 or 89 octane friendly.
Tim
1972 F350 flatbed drw c6/390
1967 F600 project truck
1972 F350 flatbed drw c6/390
1967 F600 project truck
-
DuckRyder
- Moderator
- Posts: 4918
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: Octane ratings
Not (nearly) enough information to answer...
Best go here and download the calculator and see what it has to say...
http://www.empirenet.com/pkelley2/DynamicCR.html
Best go here and download the calculator and see what it has to say...
http://www.empirenet.com/pkelley2/DynamicCR.html
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
willowbilly3
- 100% FORDified!
- Posts: 1591
- Joined: Mon Jul 19, 2004 7:38 pm
- Location: Black Hills
Re: Octane ratings
It is more cylinder pressure than compression ratio. Lobe separation angles can have as much effect as the compression ratio. Generally 9.5 would be getting toward higher octane.
Great ideas have always encounter violent opposition from mediocre minds.